Custom OEM supply to your drawings
REALJET provides custom metal boxes for IP65 projects to your drawings for OEM and contract manufacturing orders. We review gasket continuity, latch compression and cable gland interfaces before confirming the custom manufacturing scope. The manufacturing definition starts with the part's function, its installation space and the components it connects to. We review the requested geometry and delivery condition against those interfaces before defining the supply scope.
For this application, the drawing review focuses on gasket continuity, latch compression and cable gland interfaces. IP65 is a project target: final assembly testing and applicable evidence must be agreed; openings and fitted hardware affect the result. A photograph provides a configuration example; your approved documentation defines the material, dimensions, performance requirements and acceptance criteria for the ordered component.
Application fit
Gasket continuity, latch compression and cable gland interfaces are reviewed against the equipment arrangement.
Material selection
Review coated steel, stainless steel or aluminum against the design, process route and required delivery condition.
Acceptance focus
IP65 is a project target: final assembly testing and applicable evidence must be agreed; openings and fitted hardware affect the result.
Project specification and quotation inputs
| Item | Information to confirm |
|---|---|
| Component / service | Custom Metal Boxes for IP65 Projects |
| Material options | Coated steel, stainless steel or aluminum |
| Geometry and interfaces | Gasket continuity, latch compression and cable gland interfaces |
| Production scope | Enclosure fabrication with agreed secondary operations |
| Inspection focus | Cover fit, cable-entry positions and specified sealing interfaces |
| Quantity | Prototype, pilot batch or repeat order quantity for review |
| Supply condition | Loose component, part set or assembly as specified |
| Delivery | Schedule, destination and packing confirmed with the quotation |
Working size, thickness, tolerances and lead time depend on the approved design, material, quantity and inspection scope. Identify critical features and the applicable measurement conditions on the drawing so the quotation can confirm a practical acceptance basis.
What is sheet metal fabrication for this application?
A fabricated enclosure brings panels, covers and component access into one protective shell. Its physical construction can be manufactured to drawing, while any environmental, electrical or ingress-protection requirement must be defined and validated for the complete assembly.
For this product, the process is applied to develop a sealed enclosure around a defined ingress-protection requirement. The particular review priorities are gasket continuity, latch compression and cable gland interfaces; those details connect the manufacturing steps to the equipment's assembly requirements.
REALJET manufacturing advantages for this application
Review before release
The drawing revision, component function and mating interfaces establish a shared manufacturing reference before production begins.
Process matched to the part
Openings, fitted components and closure details are reviewed together; protection requirements are treated as project acceptance conditions.
Clear acceptance points
Inspection scope focuses on cover fit, cable-entry positions and specified sealing interfaces, together with the critical characteristics identified by the buyer.
Controlled repeat supply
Approved samples, material choices and drawing changes are recorded against the part number so subsequent orders can refer to the same release condition.
Fabrication technology and production sequence
- Review equipment layout and protection requirements.
- Cut profiles and form the enclosure panels.
- Join the body and prepare hardware positions.
- Finish surfaces and fit specified covers or seals.
- Inspect dimensions and perform agreed assembly tests.
The final route is selected during technical review. Additional operations, purchased fittings and testing are included only where agreed in the order scope. State protection targets and required test evidence before order acceptance; an example photo does not establish a rating.
Materials, finish and delivered condition
Material selection for custom metal boxes for IP65 projects can include coated steel, stainless steel or aluminum. The choice must reflect the actual application, rather than relying on the appearance or colour of the example image.
Review coating, plating or a bare-metal finish against the specified material and environment. Identify appearance zones, threads, grounding contacts and fitted surfaces before defining masking and finishing requirements.
Inspection and quality documentation
IP65 is a project target: final assembly testing and applicable evidence must be agreed; openings and fitted hardware affect the result. The inspection plan should address cover fit, cable-entry positions and specified sealing interfaces, with critical dimensions and test methods identified before production release.
Agree whether the order requires material identification records, dimensional reports, sample approval or additional tests. Any specified certification, qualification or compliance evidence is reviewed for the actual supply scope before order acceptance. Packaging should protect finished surfaces and the geometric features used to install the part.
About REALJET component supply
REALJET supports machinery manufacturers and equipment integrators with drawing-based component supply. We coordinate the requested manufacturing operations, fit requirements, finishing and delivery condition around the customer's assembly needs. Explore our OEM contract manufacturing and made-to-drawing fabrication service for a wider fabrication and assembly package.
Questions about custom metal boxes for IP65 projects
What should I show on the drawing?
Identify gasket continuity, latch compression and cable gland interfaces, together with the part number, revision and mating references. Provide a dimensioned PDF and available STEP, DXF or DWG files as appropriate to the component. State protection targets and required test evidence before order acceptance; an example photo does not establish a rating.
Which material and finish should I request?
Start with coated steel, stainless steel or aluminum. Describe the operating environment and identify any functional or visible surfaces. The material, manufacturing route and finish are reviewed together before the quotation is finalized.
What needs particular attention on this project?
IP65 is a project target: final assembly testing and applicable evidence must be agreed; openings and fitted hardware affect the result. State the acceptance method for any critical characteristic, and confirm whether the order includes only the component or additional hardware and assembly operations.
Can I order an initial sample before repeat production?
A prototype or pilot batch can be reviewed against the design and requested quantity. Agree sample acceptance, any required test evidence and the revision to be used for the subsequent order. Lead time is confirmed after the scope and material availability are checked.
Related component examples
Custom Stainless Steel Electronics Junction Boxes · Custom Powder Coated Aluminum Equipment Enclosures · Custom Heavy Duty Sheet Metal Control Boxes
Discuss your custom metal boxes for IP65 projects project
Send the drawing, material, quantity and required delivery date, together with gasket continuity, latch compression and cable gland interfaces, to sales@realjetech.com. Identify critical tolerances, finishing and inspection requirements so we can review the quotation scope.